主要特點：
1. 該機廣泛適用于30號(6.6mm)及以下水鉆（兩頭尖實心）、一頭尖實心鉆（用于做平底鉆）和兩頭尖空心珠的磨削和拋光工作。
2．超長夾具設計，有效針距達650mm,超多的夾具針,16號(3.8mm)鉆針多達139枚，并且同時兩只夾具一起工作，使產量大大提高。
3. 磨拋一體直線式設計，前邊設有磨輪，后邊設有拋輪，前邊磨完成后自動移動至拋輪進行拋光，無需人工搬運夾具。
4.磨拋輪固定旋轉，夾具升降采用高精度滾珠絲桿由步進電機帶動，磨拋精度可精確到0.01mm，并且每個面可單獨設置磨拋深度和時間，成品大小精確，最小可用于生產1mm即1號鉆。
5. 控制系統采用先進的電腦PLC加液晶觸摸屏，系統穩定可靠，參數設置調節方便。觸摸屏全部顯示中文，嵌套式菜單，易學易用，普通工人培訓一天即可上崗。
6．系統具有拋輪磨損自動補償功能，補償周期和補償值可任意設定，機器調好后操作工人僅需按啟動按鈕，無需再對參數進行調整。
7．機器機械結構及工作原理簡單，因此穩定可靠，而且維護保養特別方便。
8．專門設計的故障排除功能，可從觸摸屏上迅速判斷輸入輸出信號是否正常，比如感應開關是否正常，按鈕是否損壞等。
9．每班10小時可產16號（3.8mm）兩頭尖水鉆20萬顆以上。
Features:
1. This machine is suitable for grind & polish kinds of rhinestone and flat back rhinestone and hollow bead (hollow rhinestone) which it is smaller than SS30(6.6mm)。
2. Longer mould used, the distance of pin center reach 650mm, it has 139 pins for SS16 (3.8mm), and two mould work along at the same time, so it has high output.
3. Grind canister and polish canister are designed in a line, front is grind canister, behind is polish canister, the mould go to polish automatically after grind, needn’t replace the mould by hand.
4. The mould up-down system adopt high quality ball bearing pole, drive by step motor, and the up-down precision reach 0.01mm, also all side can set the parameter deepness and time alone, so the final product is exactitude. It can produce SS1 (1mm) at the smallest.
5. The control system adopt advanced PLC and touch screen, the system stability and reliability is high, the parameter set and adjust is convenience.
6. The system have polish canister abrasion expiation function, after machine adjust finished, the worker have nothing to but take the mould.
7. The machine structure and work principle are very good but very simple, so it is stably and easy to maintain.
8. Special designed trouble remove function, it can check if the input and output signal right or not from the touch screen conveniently. Such as judge the switch is right or not , the button is right or not, so remove the trouble quickly.
9. It can produce 200,000 SS16(3.8mm) rhinestone in ten hours.
主要參數Main Parameter:
1.主電機功率 Main motor 4KW
2.磨拋輪直徑 Grind canister diameter φ280mm
3.夾具有效針距 Mould pin distance 650mm
4.外形尺寸 Dimension L2520*W1400*H1700
5.一組占地面積 One set Dimension L4800*W2800
6.重量 Weight： 2.0T
|
公安備案號21010302000002
