傳統多線煙感 2線非編煙感器 電流型感煙探測器 通用煙霧報警器
可配接一切多線報警主機,多用于出口或者傳統老款消防系統(非編2總線)的維護更換,
可通過國內消防總線廠家的輸入模塊(電流型,報警之后,拉低電壓,增大電流),接入消防系統.
多線型光電感煙火災探測器(以下簡稱探測器)適用于商場、賓館、商店 、倉庫、電機房等民用及工業場所的火災預報警。探測器具有靈敏度高、穩定可靠、耗電小、美觀耐用、使用方便等特點。
注:探測器報警時將其兩端的電壓鉗位在5V~11V之間。至于電流的大小則取決于控制器的限流情況,不允許直接用24VDC供電,否則探測器會因無限流電阻而燒壞。正常使用時與多線報警主機或卷簾門控制箱等設備配套使用。探測器報警后,需要通過斷電的方式復位。
FT103 Conventional Smoke and Heat Detector, Operates by Advanced MCU Expert Algorithm Software.
Key Specifications/Special Features
They work perfectly with all conventional intelligent fire control panels
Dual LEDs for 360-degree visibility
Advanced MCU Expert Algorithm Software.
Easy installation and maintenance
Durable sensor head, no need for replacement
SMD circuit board design-satisfactory quality and reliability guaranteed
SPECIFICATIONS
Operating VoltageRange: 9 to 28VDC Volts Non-polarized
Standby Current: 60uA @ 24 VDC
Maximum Alarm Current (LED on: ) 30mA @ 24 VDC
Operating HumidityRange: 10% to 93% Relative Humidity, Non-condensing
Operating Temperature Range: -10 C to 50 C
Adjustable Sensitivity: 0.15-0.3dB/m
Height: 55 mm installed in Base
Diameter: 103 mm
Weight: 5.5 oz. (155 g)
|